- Cover & optional base Polyvinyl chloride (PVC) Construction.
- Cover is secured to optional base using two 8/32 x ½ nylon thumb screws.
- Cover M-1: For use with single speed or two speed pump motors.
- 16 ¼ inches long x 11 5/8 inches high x 12 inches wide.
- Cover M-1A: For use with variable speed pump motors.
- 16 ¼ inches long x 14 3/8 inches high x 12 inches wide.
- Optional Base: For use with M-1 and M-1A covers.
- 11 1/2 inches wide x 22 inches long.
- Cover M-1 / L: Sound Attenuation (For use with single speed and two speed motors)
16 ¼ inches long x 11 5/8 inches high x 12 wide
Front of cover has a baffle to prevent water from entering. It also provides ventilation at the top and bottom of cover. The back of cover is open allowing generous air flow for proper ventilation.
This product is warranted to be free of defects in workmanship and materials only. No other claim is expressed or implied.
Not covered: Failure due to misuse, abuse or normal wear & tear are not covered by this warranty.
Cover M-1: 5 pounds.
Cover M-1A: 7 pounds.
Cover M-1L: 8 pounds
Optional base: 2 pounds.